Download Free Audio of LESSON 1: IN-CAB INSPECTION Enter vehicle using t... - Woord

Read Aloud the Text Content

This audio was created by Woord's Text to Speech service by content creators from all around the world.


Text Content or SSML code:

LESSON 1: IN-CAB INSPECTION Enter vehicle using three points of contact, put on your safety belt SAFE START • Key On, ABS On & Off, Release the Break, Start Engine Emergency Equipment: • Three reflective triangles • Present: Proper color NO damage NO crack . • Fire extinguisher - fully charged, updated, NO missing pin, Securely Mounted • Extra Fuses- Present- Good Condition Traffic Monitoring Devices: • Mirrors - NO damage. NO cracked, NO illegal stickers, clean, adjusted to me securely mounted • Windshield - NO damage , NO cracked, NO illegal stickers. clean, Securely mounted Wipers and Washers: • NO broken. NO damaged, NO missing rubber seal, securely mounted. • Washer Water is working Checking Lighting: • Left turn signal (working), Right turn sign.1I (working), 4-way flashers(working), Low beam(working), High bez.:-n (working) Horn(s): • City Horn and Air Horn: working Heater and-Defroster: • Working properly ,. Parking Brake Check: • Trailer Brake (RED) Parking Brakes (Yellow) Service Brake Check: • Service Brake: drive 5 MPH and STOP, Don't Touch the Steering *Air Brake Check: AUTOMATIC FAILURE IF NOT PERFORMED CORRECTLY • I will build air to governor cut off between 120 -140 psi • Wait until the truck sneezes then let the examiner know what the truck cutoff is? example: "my truck cut off at 125 psi" • Chock wheels (if necessary) then return to vehicle • Air Leakage Test: I should not lose more than 4 PSI in 1 minute. ► I did not lose more than 4 PSI in 1 minute. • Warning Signal Test: should come on ABOVE 55 PSI (look at the air gauges) ► My warning signal is working. • Emergency Brakes (pop out) Test: should popout Between 40 and 20 PSI ► My Emergency Brake is working. LESSON 2: EXTERNAL INSPECTION Light Operations Check: • Ask the examiner to assist you with the light check and direct where to go • Tell or indicate to the examiner exactly what lights you are inspecting. make sure to check the driver side and the rear side. Front of Vehicle: • Left and Right Signals, 4-way Flashers, Headlights - Low and High Beams, Clearance and Marker Lights Sides of Vehicle: • Left and Right Signals, 4-way Flashers, Clearance and Marker Lights Rear of Vehicle (trailer only): • Left and Right Signals, 4-way Flashers, Brake lights, Clearance and Tail Lights