Read Aloud the Text Content
This audio was created by Woord's Text to Speech service by content creators from all around the world.
Text Content or SSML code:
Welcome back Today we are doing yet another Halloween project before we move on to Christmas projects so today we are making a spa or bathtub type candle for our skeleton so we will need a metal container like this I will always go and recycle while I can, then we will need some candles I even found the orange color so I will use these then as usual I will leave you in the description in PDF to download the drawing and take in order to apply it on our bathtub and so at this point we should to paint it I painted our Halloween style bathtub all black so once painted black I prepared my skeleton this and the printed one But you can also find them on the market in more or less the same dimensions I made it the dimensions that I needed them for my bathtub. So now with a little hot glue I'm going to fix my skeleton to the bathtub.Here I am, I fixed it with a bit of hot glue on the edges and at this point we are already ready to melt in a bain-marie. I will put two wicks on the candles.I prepared the wicks you see with a toothpick with a stick so that they remain upright so that when we go to pour the melted dinner they remain right in their exact position while the dinner is melting We can start doing the image transfer If you want ink transfer or even simply by putting some tape over our drawing which I always leave you the link we made different sizes there are three sizes you can take the size you want I then printed it on orange paper But you can print it on any color of paper seen that Halloween is perfect Orange so I put some tape over the drawing which I will then have to cut out this will serve to give both clarity to our drawing and also to protect our drawing Then with a credit card or stuck the drawing perfectly onto the tape this then The we also used on the previous video those of the globe always in for Halloween which you can always find here in my channel in the playlist for Halloween you can find all my free projects Here once you put the tape on now all we have to do is cut it out once it's cut out This is the result if you printed it on white paper This will be the result while on orange paper the result will be this now let's go and see how the wax is put Eh it's melting it's almost ready once it's ready We can start pouring little by little into our container then we'll leave them to cool obviously And this will be the result you see that I've also covered part of our skeleton like this it remains fixed inside the wax now we are going to remove the excess mice we cut the Wicks Now we can stick our design or white orange we can choose what we want I decided to put this here and here too all it takes is a little glue stick or even with vinyl as you prefer. now I have created some feet for the bathtub which I will always attach with a bit of hot glue, even these already 3D printed I will glue them right underneath in this sense to create feet for a bathtub This is our bathtub for our Halloween skeleton Then I also put a turban on our skeleton's head a towel to create the spa effect again and our skeleton is ready to take a bath inside the wax let's light the candles and our SpA is ready. Well guys, that's all for this video too, I'll wait for you in the next video