Read Aloud the Text Content

This audio was created by Woord's Text to Speech service by content creators from all around the world.

Text Content or SSML code:

How to Verifying the VDC Configuration in nexus 7000 series? Follow below code: show running-config {vdc | vdc-all} show vdc [vdc-name] show vdc detail show vdc current-vdc show vdc membership [status] show vdc resource template show resource show vdc [vdc-name] resource [resource-name] show mac vdc {vdc-id} How many OSPF processes can be run in a virtual device context (VDC)? There can be up to four (4) instances of OSPFv2 in a VDC. How many syslog servers can be added to a Nexus 7000 series switch? The maximum number of syslog servers configured is 3. Which modules support FabricPath, FCoE, and FEX connectivity? FabricPath is supported on all F1 and F2 modules. FCoE is supported on all F1 modules and F2 modules except on the 48 x 10GE F2 (Copper) module. FEX is supported on all F2 modules. Use this link from Cisco as a reference. F2e module supports FCoE, FEX, and FabricPath. The F3 module (12 port 40GE) supports FEX, FabricPath, FCoE, OTV, MPLS and LISP. Which modules support LISP, MPLS, and OTV? All M1 and M2 modules support MPLS and OTV. LISP is supported only on the 32 x 10GE M1 module. How many VDC’s can the Nexus 7000 support? 4 VDC’s (including 1 VDC for management) with SUP1 or SUP2; and 8 + 1 (management) VDC’s with SUP2E. What are Cisco catalyst Switches? The Cisco Catalyst switches offer a variety of wireless controllers, network switches, and wireless access points. Taking of the switches, these make use of IOS as their operating system. What is use of static Pinning? The static pinning feature allows groups of access interfaces to be bound to particular fabric (uplink) interfaces with the command pinning max-links. If a fabric interface fails, its pinned access interfaces are automatically shut down. How To forward traffic from host interface to parent switch? There are two way to forward traffic from host interface to parent switch: static pinning: It allows you to bind a number of host interfaces to a fabric interface Port Channel: It provides load balancing between the host interfaces and the parent switch. A fabric interface that fails in the port channel does not trigger a change to the host interfaces. Traffic is automatically redistributed across the remaining links in the port channel fabric interface. Can you explain BackboneFast In the network backbone, or even core layer, a totally different method would be used to shorten STP convergence. It operates by having a switch actively determine whether or not alternative paths are available to the root bridge, in the event the switch detects an indirect link failure. Indirect link failures happen when a link which is not directly connected to a switch fails. A switch detects an indirect link failure any time it receives inferior BPDUs from its designated bridge on both its very own root port or a blocked port. How to configure the BackboneFast in Switch use the command? Use the below command: Switch(config)# spanning-tree backbonefast.